Frequently asked questions

General

Most water vitalisation systems use cylindrical or even rectangular shapes, i.e. Euclidean geometries. AcquaPhi, on the other hand, consistently uses non-Euclidean geometries such as egg shapes, curves and spirals. Only in this way is a profound physical treatment possible.

AcquaPhi is one of the few instruments on the market where the higher oxygen content and pH value of the water can be measured in the laboratory.

No. AcquaPhi is designed to operate with tap water that is already of drinking water quality. AcquaPhi can be combined with all common filter systems if required.

AcquaPhi is a water treatment system with a sophisticated concept that uses special geometries, vortices and materials to vitalize the water.

Effects

Yes, the increase in dissolved oxygen and pH are measurable in the laboratory. To date, there are a number of indications of the effects that AcquaPhi has on tap water. These include observations such as stronger plant growth, fresher tasting water, less limescale build-up and so on. A scientific paper at the University of Bari, led by Professor Domenico Spinazzola, Department of Preventive Medicine (Medicine and Surgery), confirmed these effects in May 2013.

As with the methods of alternative medicine, the effects of AcquaPhi are not completely understood in a strictly scientific sense, although the effects are demonstrably measurable.

Lime (calcium carbonate) in water can cause problems in pipe and heating systems. The reason lies in the structure of the lime. In normal water, the formation of calcite crystals is favoured, which can cling to surfaces with their needle-shaped tips. This leads to deposits and ultimately to hard-to-remove incrustations in boilers, pipes and on fittings. AcquaPhi changes the structure of the lime crystals. Acquaphi treatment favours the formation of aragonite crystals, which have a round shape. This makes them difficult to deposit - and limescale stains are easy to remove, usually even without using cleaning agents. Already existing incrustations, for example in the water pipes, dissolve over time. After installing an AcquaPhi in the main water line, a lot of limescale dissolves in the first few days, so the screens at the faucet outlets have to be cleaned. Especially in older homes, whole chunks often come loose from the incrustations. AcquaPhi does not remove the limescale, but changes its structure. For this reason, no difference is to be expected in the measurement of water hardness.

Studies have shown that the pH value is slightly increased by treatment with AcquaPhi and thus becomes more alkaline - the lower the pH value beforehand, the stronger the effect. The influence of AcquaPhi on the pH value will be investigated in more detail.

How it works

To create buildup processes, it is most efficient to copy nature. Nature uses non-Euclidean geometries such as curves, spirals and egg shapes. It is no coincidence that the life of many animals originates in eggs. The golden ratio (phi geometry) is a constant in nature. It is therefore obvious to calculate - and use - an egg shape according to the golden section.

In addition to the housing, the piping inside the AcquaPhi is also designed according to Phi geometry. The pipe is geometrically wound around a double cone in corresponding channels, whereby the channels correspond to the ratio Phi with regard to angle and curvature ratios at every point of the spiral. In terms of implosion, this is geometrically ideal.

The only possible supplier of oxygen are the water molecules themselves. They consist of two atoms of hydrogen and one atom of oxygen.
Professor Konstatin Meyl researches in the field of scalar waves and continues the work of Nikola Tesla. His lecture "Scalar Wave Influence on Water" about the scientific background of physical water treatment, as it also takes place at AcquaPhi, very interesting.
According to Professor Meyl, neutrinos and scalar waves are identical (once as particles, once as waves). This explains why there is more dissolved oxygen in the water (neutrinolysis) due to the mechanical and electrical turbulence via quartz crystals with piezoelectric properties (Mixos).
According to Professor Meyl, these phenomena can be explained by the clever use of the scalar waves or potential vortices that are present everywhere: "As an extremely dielectric medium, water favours the formation of potential vortices, which contract rapidly immediately after their formation. This size oscillation of the electrically charged potential vortices actually allows them to interact with neutrinos, and this results in water splitting and an increase in the oxygen content of the water, for one thing." In his book "Electromagnetic Environmental Compatibility," Prof. Meyl writes: "The ideal antenna for scalar waves follows the design rule of the golden section."
According to this, AcquaPhi with its egg shape and the winding geometry with the corrugated tubes following the golden section is an ideal "antenna" for scalar waves. There are many devices that can be used to oxygenate water, but the higher oxygen content usually only lasts a short time.
In laboratory measurements, water treated with AcquaPhi was sealed in a hermetically sealed Winkler bottle for 24 hours to exclude the possibility of it coming into contact with oxygen from the ambient air. The measurement after 24 hours showed that the oxygen content remained stable. Therefore, we conclude that the spontaneously generated oxygen is stably embedded in the water structure. The Winkler bottle was opened for measurement, so any oxygen that might have become volatile would have escaped immediately.

The pipeline does not have to be interrupted. The turbulence is achieved by using a corrugated stainless steel pipe, which provides a very strong turbulent flow.

AcquaPhi has been developed for the use of drinking water. AcquaPhi products have no filtering effect, as it is assumed that the water is already of drinking quality. If desired, AcquaPhi can be combined with any filter system.

Has your question been answered?

You have further questions about our products or their application in your specific case? Please contact us. We will be happy to get back to you!





    Shopping cart
    -
    +
    Total
    $58.50